Reef Pure RO System – Booster Pump Upgrade Kit

This upgrade kit provides everything you need to upgrade your system with a booster pump and also have it automated by installing the Reef Pure RO Systems Auto Shut-Off Float Valve Upgrade Kit. The kit includes high and low-pressure switches giving your system the ability to detect when your water reservoir is full, disabling the booster pump accordingly.

All RO membranes have an optimal minimum operating pressure. The PurePro RO membranes used in all Reef Pure RO Systems have an optimal minimum operating pressure of 50psi.

The system will operate below 50psi, however, the performance of your RO membrane will not be optimal. Your system will produce more wastewater and will also result in a higher TDS reading of your RO production water. This is due to a reduced salt rejection from your RO membrane. A higher TDS reading will also deplete your DI resin much quicker than a system producing low TDS water.

The great news is that it is simple to get your system running at the optimal pressure with one of our PurePro HF-8367 RO Booster Pump and will save you a small fortune in DI resin replacement costs.

RO BOOSTER PUMP UPGRADE KIT FEATURES:

• Includes complete assembly, including AC adapter, high and low-pressure switches
• ¼” Push Connect fittings
• Included base plate & bracket for simple installation
• Base plate design which significantly dampens vibrations and reduces noise
• Includes an Australian compliant transformer

THE PUREPRO HF-8367 RO BOOSTER PUMP UPGRADE KIT INCLUDES:

• PurePro HF-8367 RO Booster Pump
• 240V AC Adapter
• High & Low Pressure Switches
• Assembly Bracket

BENEFITS AT A GLANCE:

• High and low-pressure switches deactivate the pump when the water supply has been discontinued or when used with automation devices such as an auto shut off valve and/or float valve kit.
• Significant improvement in product to waste water ratio
• Faster production of 0 TDS, reef grade RO/DI water
• Optimal membrane rejection performance of >98%
• Savings in DI resin due to lower TDS output from your RO membrane

PLEASE NOTE:

• The PurePro HF-8367 RO Booster Pump does require a minimum operating pressure of 20 psi. Running the booster pump below the minimum 20 psi feed pressure will cause poor performance and may damage the unit.
• If you intend to automate this upgrade kit, such as with a float valve, an additional check valve is required on the production line from the RO membrane housing.